| TYPE 925 多功能供应歧管 |
| Process reliable and field rugged |
|
   
|
| Now there's a compact I/P transducer that delivers reliable high performance for the toughest applications in the most hazardous environments: the T950XP from ControlAir.The 950XP converts an electrical current signal to a stable, pneumatic output to actuate valves. Its NEMA 4X (IP65) housing is designed for both Intrinsically Safe* and Explosion-Proof* operation. Advanced circuitry includes electronic feedback control for superior vibration protection and highly accurate output. With flow rates up to 12 SCFM(20m3/hr), the 950XP has the muscle to drive large valves and actuators. Yet because it typically consumes only .05 SCFM (0.11m3/hr), it not only costs less to buy, it costs less to operate as well. And because it takes impure air in stride, downtime is reduced, too. The 950XP gives you big flexibility. Its small footprint can fit into tight spots. Its standard mounting bracket lets you mount it directly on a valve, wall, panel, or pipe. Optional, field-selectable process output ranges reduce downtime and inventory. And since the 950XP is position insensitive, it gives you even more freedom in mounting and connecting to valves and instruments. As a result of this flexibility, installation goes faster. Easy access Zero and Span adjustments make bench or field calibration quick and easy. For operating versatility, you may choose direct, reverse, and split range modes. |
| 技术资料订购 |
|
|
规格
| 更多详情，请访问我们的官方网站：www.controlair.com.cn |
|
或者是致电：18611155599（于先生） |
|
或者是： |
|
详情请咨询http://www.controlair.com.cn |
|
电话：010-56205577 18611155599(于先生) |
|
邮箱：controlair@126.com |
功能规格
| 输入 |
4-20 mA |
| 输出 |
3-15 psig 0.20-1.00 BAR
3-27 psig 0.20-1.80 BAR
6-30 psig 0.40-2.00 BAR |
| 耗气量 |
在中档3.0 SCFH（0.11 m3/hr） |
| 供应压力 |
100 psig (7.0 BAR) 最大
Note: Supply pressure must be a minimum of 5 psig above maximum output
|
| 流通能力 |
4.5 SCFM (7.6 m3/hr) 在 25 psig
(1.7 BAR) 供应
12 SCFM (20.0m3/hr)在100 psig
(7.0 BAR) 供应 |
| 温度限制 |
工作温度：-40°C至+160°F（-40℃至+71℃）
存储温度：-40°C至+200°F（-40℃至+93°C） |
| 循环负载，I/P传感器 |
7.5 VDC @ 20 mA |
| 阻力 |
260 Ohms @ 70°F |
| 操作模式 |
直接，反向或分割的范围 |
性能规格
准确性，
迟滞，
重复性 |
± 0.10% 域值 |
| 盲区 |
0.02%域值 |
| 位置效应 |
没有明显的效果 |
| 振动效应 |
小于±1％的跨度，在下列情况下：5-15 Hz@0.8英寸，恒位移;15-500赫兹10g的 |
| 供应压力的影响 |
没有明显的效果 |
| 温度效应 |
±0.045%/°F (0.07%/°C)域值 |
| 反向极性效应 |
没有正常供电电流逆转的破坏
（4-20 mA）或误高达60 mA的 |
| RFI-EMI效应 |
跨度每EN61000-4-3输出压力的变化：1998年，修订1，性能标准A小于0.5％ |
物理规格
| 接口尺寸 |
气动1/4" NPT
电动1/2" NPT |
| 介质 |
清洁，干燥，无油，空气过滤至40微米 |
| 安装方式 |
直壁，面板，或2“管道（可选） |
| 材料 |
外壳：铬酸盐处理的环氧树脂烤漆铝。符合NEMA 4X（IP65）。
密封：丁腈橡胶
修剪：不锈钢，黄铜，镀锌钢
|
| 重量 |
1.8 lbs (.82kg) |
|
| 订购信息 |
电气转换器又被称作电气比例阀，电流压力变换器，电压-压力变换器，I/P、E/P转换器，比例阀 |
更多详情，请访问我们的官方网站：www.controlair.com.cn
或者是致电：18611155599（于先生）
或者是：
详情请咨询http://www.controlair.com.cn
电话：010-56205577 18611155599(于先生)
邮箱：controlair@126.com
点击图片查看原图